I2C Transfer Board



CrossRace/CrossFlight/PIXHAWK/

Mini Pix/TURBO PiX I2C Port Extension

Connect I2C Modules, Possible to Hold Altitude

GPS

Altittude Holding


LED Module

Flight Controller

I2C Transfer Board

Extend the I2C port quantity of the Flight Controller (CrossRace/CrossFlight/PIXHAWK/Mini Pix/TURBO PiX) as TWO. The two I2C ports can be used to connect corresponding I2C modules such as one ultrasonic sensor SU04* to achieve altitude holding and an LED module.

* Another SU04 can be connected to TELEM1/2 port of FC to avoid obstacles from one direction(forward/backward/left/right).

Obstacle Avoidance

Extend Mavlink Port & I2C Port


The two ports in the middle of the transfer board are I2C ports which extend that of the flight controller (CrossRace/CrossFlight/PIXHAWK/Mini Pix/TURBO PiX) as TWO.

One of the two ports on both sides is for input while the other is for GPS module.

* I2C Transfer Board: Standard accessory packed with Mini Pix/TURBO PiX.

* I2C Expansion Board: The I2C port of the flight controller can be extended to a maximum of six.

Input Port

I2C Port

GPS Port

Name




Picture




Port Quantity



Port



Function





Compatible Flight Controller


Compatible Module





Remark

I2C Expansion Board VS  I2C Transfer Board


I2C Expansion Board





7P


1 Input Port and 6 I2C Ports


Extention of I2C Port Only


Obstacle Avoidance of Six Synchronous Direction (Overall)

I2C Transfer Board





4P


1 Input Port, 2 I2C Ports and 1 GPS Serial Port


Extention of I2C Port and GPS Serial Port


Obstacle Avoidance of Arbitraty Two Synchronous Directions



Compatible with RadioLink CrossFlight/Mini Pix/TURBO PiX/PIXHAWK and Open-Sourced PIXHAWK


Compatible with RadioLink Ultrasonic Sensor of Obstacle Avoidance SU04/SUI04


Two I2C ports can be used to connect with corresponding I2C modules such as one ultrasonic sensor SU04 to achieve altitude holding and an LED module.



Mini Pix/TURBO PiX Standard Pack

When GPS and ultrasonic sensors need to be connected at the same time, a transfer board is essential to connect with the GPS/I2C port of flight controller first, then expansion board to the transfer board.


Accessory, Purchased Individually